Roll Top Toy box Instruction Sheet

Return to Toy Box Page

Parts Consist of:    1   back              1   left side
                                      1   top shelf        1   front
                                      1   right side      1   bottom
                                      12  #8x11/4" wood screws
                                      12 hardwood buttons

To assemble:   

1.  Stand Toy Box back on it's left side.  Slip the top shelf into the wide slot, finished side facing out

2.  Set the right side on top, making sure back edge is even and shelf is in top slot.  Starting at the back edge screw pieces together through pre-drilled holes. 

3.  Carefully lay toy box on it's back.  Slide roll into curved slot all the way to the back. 

4.  Carefully turn unit over onto a piece of carpet or towel (to protect finish).  Set left side on top.  Attach as with right side.

5.  Slide the bottom into it's slot,   bottom support foot to outside.  Make sure it fits tightly into back as well as both sides.

6.  Set front panel on making sure all edges are even.  Secure with 2 screws, each side, into pre-drilled holes. Gently tap wood buttons into all the screw holes.  You should glue these buttons if to be used around a small child.